Plug & Play ready out the box.  Connect to your preferred USB 5V Power Adapter and it’s ready to work

Built from Fire-Retardant materials adds to the list of safety features

Unilateral design derived directly from the high-quality SCHOOL charger lineup

Long-throw sliders allow cells up to 71mm length

Simplistic LED system.  RED = charging; GREEN = charged

Optimal contact with the top portion of the cell with its Multi-Groove positive post

Has the safety features one would expect from Hohm Tech.  Enabled with:  1. PCB Overheat Prevention;  2. Short-Circuit Prevention;  3. Reverse-Polarity Prevention;  4. Over-Charge Prevention

Li-ion sizes: 26650, 22650, 21700, 20700, 18650, 18490, 18350, 17500, 16430 (RCR123), and more

Charging with proven CC & CV (constant current & constant voltage)

• Just like its bigger siblings, it utilizes the integrated IPR System.  IPR= Input Power Regulator.  This enables the charger to withdrawal demanding high power from underpowered USB Power Adapters

  
  
• 
  

  Designed specifically for protected and non-protection 3.6v/3.7v Li-ion (lithium-ion) cells

  
  
• 
  

  Big-Bore Slot to secure both small & large Li-ion cylinders (easily handles 26650 girths)

   
  

   
  

  Simplicity in a single-slot form.  We present Hohm SCHOOL^UNO.   It combines the charging capability of its bigger brother Hohm SCHOOL² but combines that power into 1 single slot.  That is 2000mA (2A output) of single-cell charging speed.  We did not go with 3A as this often accelerates cell degradation and reduces cycle life.  2A charging is a speedy yet conscientious charging speed for today’s lithium-ion cells.  There is no need for a screen on this charger. It is 100% autonomous. It is equipped with the IPR System¹, which automates the step-up/down output to match the power adapter that supplies the power.  Whether you use an older 0.5A or a newer 2A (or greater) power supply/adapter, the Hohm SCHOOL^UNO will do a proper job.  Even li-ion batteries with or without PCB/PCM² are easily balanced to the correct voltage. This ensures today’s small li-ion batteries’ chemistry integrity is not compromised, allowing them to get the cycle life they deserve.

   

  Applying forward-thinking to safety & performance, we integrated input power regulation. This is safety 101 here. This allows the charger to not stress or damage USB adapters no matter which power supply is used. The fact is simple: today’s li-ion batteries need precise voltage and amperage delivery to ensure long reliable performance & life…Say hello to Hohm SCHOOL^UNO, the smarter single-slot charger.

   

  Equipped with:

  > IPR System – no more stressing USB power adapters or ports
  > Low-Voltage Activation – If a cell has low voltage and is not charging on other chargers, let this charger go to work for you.
  > Compatible with ALL li-ion cells from as short as 30mm to as long as 71mm
  > LED indicator that reports color and blink variation for quick/easy readout
  > PCB/PCM³ compatible so even protected cells aren’t left out in the cold
  > Protection 101: A] Short circuit; B] PCB overheat C] Reverse polarity; D] Over-charge prevention

   

  Every Hohm Tech product is tested and certified by the rightful authorities/laboratories and accredited entities to achieve Compliance & Certification of: IEC 62133 2nd Edition, UN38.3, PSE, CE, ROHS, FCC, Air/Sea Transport, and is backed by Industry Leading PLI.  We do not cut corners. We deliver what we promise… chart-topping performance, capacity, consistency, and safety.

   

  ¹ Input Power Regulator
  ² Protection Circuit Board/Module
  ³ Volt Recognition @ 2.9V

   

  WARNING: Know your battery & charger warning & safety information

  Consult a certified lithium-ion specialist or certified battery pack assembler if there are any uncertainties or questions on the use of, handling of, installation of, charging of, or storage of lithium-ion batteries. Consumer safety is of utmost importance.